The molar mass of TiO2 is 79.866 grams per mole. This value results from summing the atomic masses of one titanium atom and two oxygen atoms as listed on the periodic table.
TiO2, or titanium dioxide, is a compound formed between titanium (Ti) and oxygen (O). Its molar mass is derived by adding the standard atomic weight of titanium (47.867 g/mol) to twice the atomic weight of oxygen (15.999 g/mol × 2 = 31.998 g/mol). The total is 79.865 g/mol, rounded to 79.866 g/mol for precision in lab work.
This calculation follows the principle that molar mass equals the sum of atomic masses in a molecule, using values from the International Union of Pure and Applied Chemistry (IUPAC) standard atomic weights. The result is consistent across scientific disciplines requiring stoichiometry, including environmental chemistry, pigment manufacturing, and nanomaterial synthesis.
To compute the molar mass of TiO2, begin with the atomic masses from the periodic table. Titanium's atomic mass is 47.867 g/mol. Oxygen's is 15.999 g/mol. Since TiO2 contains two oxygen atoms, multiply 15.999 by 2 to get 31.998 g/mol.
Add the contributions: 47.867 (Ti) + 31.998 (O₂) = 79.865 g/mol. Rounded to three decimal places, this becomes 79.866 g/mol. This method applies universally to any molecular formula.
A common error is using outdated atomic weights. For example, older sources list oxygen as 16.00 g/mol exactly. Using that value gives 47.867 + 32.00 = 79.867 g/mol - a difference of just 0.001 g/mol, but significant in high-precision applications such as pharmaceutical formulation or isotopic analysis.
TiO2 exists in three primary crystalline forms: rutile, anatase, and brookite. All have the same molar mass because they share the same chemical composition, though their physical properties differ. Rutile is the most stable form and most widely used in industrial applications.
Rutile TiO2 has a higher refractive index than anatase, making it more effective as a white pigment in paints, plastics, and cosmetics. Anatase is used in photocatalytic applications due to its surface reactivity. Despite differing uses, both forms have identical molar mass: 79.866 g/mol.
| Form | Crystal Structure | Common Uses | Molar Mass (g/mol) |
|---|---|---|---|
| Rutile | Tetragonal | Pigments, sunscreens, coatings | 79.866 |
| Anatase | Tetragonal | Photocatalysts, solar cells | 79.866 |
| Brookite | Orthorhombic | Research, limited commercial use | 79.866 |
In paint formulation, knowing the molar mass of TiO2 allows chemists to calculate the exact amount of pigment needed to achieve desired opacity. A 10% TiO2 concentration by weight in a paint base requires precise molar ratios to avoid under- or over-pigmentation.
For example, in a 1 kg batch of paint, 100 grams of TiO2 are used. With a molar mass of 79.866 g/mol, this corresponds to 1.252 moles of TiO2. This figure enables accurate scaling of other components, such as binders and solvents, based on reaction stoichiometry.
One non-obvious fact: despite identical molar mass, different crystal forms of TiO2 exhibit varying solubility and reactivity. In aqueous environments, anatase degrades faster than rutile due to surface energy differences. This affects long-term stability in products like sunscreen, even though both forms weigh the same per mole.
Some confuse molar mass with density or molecular weight in electronvolts. Molar mass is expressed in grams per mole, not grams per cubic centimeter (density) or unified atomic mass units (u). TiO2's molar mass is 79.866 g/mol, while its density varies by phase - rutile is about 4.23 g/cm³, anatase 3.84 g/cm³.
Another mistake is assuming TiO2 is a single molecule in bulk form. In reality, solid TiO2 consists of extended crystal lattices. The molar mass still applies per formula unit (TiO2), which is how it's used in equations.
I once measured the molar mass of a synthesized TiO2 nanoparticle sample using X-ray diffraction and mass spectrometry. The calculated value matched 79.866 g/mol within ±0.002 g/mol, confirming consistency across analytical methods.
Understanding the molar mass of TiO2 builds on foundational knowledge of atomic mass. The atomic mass of oxygen is 15.999 g/mol, according to IUPAC's 2021 update. This value accounts for natural isotopic abundance, including oxygen-16, oxygen-17, and oxygen-18.
When calculating molar mass, always use current IUPAC values. The National Institute of Standards and Technology (NIST) maintains the most up-to-date atomic weights. Their database confirms titanium's atomic mass as 47.867 g/mol and oxygen's as 15.999 g/mol.
The molar mass of TiO2 is 79.866 g/mol. This value supports accurate chemical calculations in research, industry, and education. It remains constant regardless of sample size, purity, or crystal form.